COMPANY NAME
MGR.ROBLES
CARPENTRY HARDWOOD FLOORING
MGR.ROBLES
CARPENTRY HARDWOOD FLOORING
SANDING END REFINISHING HARDWOOD FLOORS
Of our experience for sanding wood floors are considered to be forms best know as
sanding the wooden floor to change color sanding is necessary to use thicker sand paper
than the floor is to match the wood floors or to remove scratches or very old oil, painting
glue end more waste after we remove all the waste.
Back to sand with sandpaper do the floor is smooth and fine to given a shine to the
finish followed by the team of experts comes to pass buffing with fine sandpaper all the
wood floor has been sanded end then vacuun cleaner happens then is passed a wet
cloth or towel to the wooden floor is very clean.
And proceed to put a coat of oil base that is required to remain seated for 16 to 20
hours to dry thoroughly and then the team of experts buffing proceeds to pass over the
1 layer of base oil with a very soft sandpaper fine or screen and then we pass vacuun cleaner after this we will clean all the wood floor wet rags or towels for you wood floor
is very clean and then proceed ua before menttioned to put the 2 coats end let sit for
16 to 20 hours.
We always put 3 coats of oil base your wood foor to make it more durable and will
last for 6 to 8 years dependig on the care that you have your wood floor.
Project completion sanding wooden floor very nice stay at 20 or 24 hours following the wood floor wil be dry and you can move all your things. Tables,chairs beds end stacking wood floor sanding end varnish is.
If the wood floor is 3/4 thick solid oak, this wood can be sanded several times and
can last for long.
But if the wood floor is engineered wood flooring is very thin 1/4, 5/16, 1/2.
can be sanded thickness of approximately 1 to 3 times there are several kinds and colors of the wood the more common red oak, white, oak.
KINDS OF BASE OIL
Polyurethane. semi gloss, satin, water base, moisture cured urethane, sealer oil base, sealer wara base.
sanding the wooden floor to change color sanding is necessary to use thicker sand paper
than the floor is to match the wood floors or to remove scratches or very old oil, painting
glue end more waste after we remove all the waste.
Back to sand with sandpaper do the floor is smooth and fine to given a shine to the
finish followed by the team of experts comes to pass buffing with fine sandpaper all the
wood floor has been sanded end then vacuun cleaner happens then is passed a wet
cloth or towel to the wooden floor is very clean.
And proceed to put a coat of oil base that is required to remain seated for 16 to 20
hours to dry thoroughly and then the team of experts buffing proceeds to pass over the
1 layer of base oil with a very soft sandpaper fine or screen and then we pass vacuun cleaner after this we will clean all the wood floor wet rags or towels for you wood floor
is very clean and then proceed ua before menttioned to put the 2 coats end let sit for
16 to 20 hours.
We always put 3 coats of oil base your wood foor to make it more durable and will
last for 6 to 8 years dependig on the care that you have your wood floor.
Project completion sanding wooden floor very nice stay at 20 or 24 hours following the wood floor wil be dry and you can move all your things. Tables,chairs beds end stacking wood floor sanding end varnish is.
If the wood floor is 3/4 thick solid oak, this wood can be sanded several times and
can last for long.
But if the wood floor is engineered wood flooring is very thin 1/4, 5/16, 1/2.
can be sanded thickness of approximately 1 to 3 times there are several kinds and colors of the wood the more common red oak, white, oak.
KINDS OF BASE OIL
Polyurethane. semi gloss, satin, water base, moisture cured urethane, sealer oil base, sealer wara base.
STAINING HARDWOOD FLOORS
The wooden floor to be staining is necessary to fine sanding to remove all waste too old oil based paint, stains being completely the wood floor sanding it smooth and very fine proceed to pass buffing with fine sandpaper 150 grit and then we pass the entire bacuun cleaner wood floor so it is very clean with no residues of trash.
Then proceed to put the linear stained the wood floor installed by following the lines of the wood with a very soft cloth or towel staining when the wood floor in sitting immediately proceed to clean very soft.The stained for the desired color remaining after applying the staining is necessary to ramain seated for 6 to 10 hours to dry thoroughly
and then proceed to put a base coat of oil after the first coat of oil base to dry takes
longer to dry well that are between 24 to 30 hours depending on the temperature you
are at home prefer this 60 temperature and 75 and then we pass buffing or sanding 220 grit screen end pass to vacuun cleaner wood floor and wet towels to put the oil base. IT necessary to apply 2 to 3 coat of oil base on tinting so that the floor is the color choice and will last for many years.
Then proceed to put the linear stained the wood floor installed by following the lines of the wood with a very soft cloth or towel staining when the wood floor in sitting immediately proceed to clean very soft.The stained for the desired color remaining after applying the staining is necessary to ramain seated for 6 to 10 hours to dry thoroughly
and then proceed to put a base coat of oil after the first coat of oil base to dry takes
longer to dry well that are between 24 to 30 hours depending on the temperature you
are at home prefer this 60 temperature and 75 and then we pass buffing or sanding 220 grit screen end pass to vacuun cleaner wood floor and wet towels to put the oil base. IT necessary to apply 2 to 3 coat of oil base on tinting so that the floor is the color choice and will last for many years.
NEW HARDWOOD FLOORING INSTALLATION
Install all types of hardwood flooring projects get started before the team of
experts should be to check that the subfloor or plywood be sure and strong
if this squeaks or loose screws or do not have the experts. Team should compose the subfloor or plywood. Team of being all in good clean the area or pass vacuun cleaner so that the subfloor is clean and then proceed to put
rosin paper or underlayment.
plywood over the entire area that will install new wood floor or rosin paper
underlayment. This helps the wood floor is kept dry and not much noise to be
heard in good condition and everything clean end ready our team of experts begins install new hardwood floor.WE INSTALLED.
Unfinishing hardwood floor, pre-finishing hardwood floors. engineered floors
laminate flooring. installation wood flooring borders.
experts should be to check that the subfloor or plywood be sure and strong
if this squeaks or loose screws or do not have the experts. Team should compose the subfloor or plywood. Team of being all in good clean the area or pass vacuun cleaner so that the subfloor is clean and then proceed to put
rosin paper or underlayment.
plywood over the entire area that will install new wood floor or rosin paper
underlayment. This helps the wood floor is kept dry and not much noise to be
heard in good condition and everything clean end ready our team of experts begins install new hardwood floor.WE INSTALLED.
Unfinishing hardwood floor, pre-finishing hardwood floors. engineered floors
laminate flooring. installation wood flooring borders.
INSTALLATION GLUE DOWN
glue down if we can be installed on a concrete floor must be dry and flat cracks holes must be filled with cement if the subfloor is cake oil or other materials necessary to remove all the waste so that no glue down off being very clean and evenly throughout the concrete floor of our team comes to installing glue down hardwood flooring. We installed solid oak, parquet,glue
down engineered flooring.
there are areas.methods to install engineered flooring. staples, glue down.
down engineered flooring.
there are areas.methods to install engineered flooring. staples, glue down.
HARDWOOD FLOORS REPAIR
If you wood floor is damaged and has large cracks and holes dog urine, stains from your floor boards are heavily damaged wood that are unsightly in your wood floor.Our team of experts
will replace the wood that is in poor condition we get the wood
will not work an install new wood of the same kind of floor that
has home to match and look alike.If the unfinished wood floor sanding or pair it is necessary for the wood floor is uneven. and
when the work is finished with three coats of oil base or water base. Will not tell the difference and its floor looks like new we
repair all tyoes of hardwod floor.
pre-finised wood glue down flooring parquet flooring, solid oak
engineered flooring.
will replace the wood that is in poor condition we get the wood
will not work an install new wood of the same kind of floor that
has home to match and look alike.If the unfinished wood floor sanding or pair it is necessary for the wood floor is uneven. and
when the work is finished with three coats of oil base or water base. Will not tell the difference and its floor looks like new we
repair all tyoes of hardwod floor.
pre-finised wood glue down flooring parquet flooring, solid oak
engineered flooring.
BUFFING RECOAT
IF the color of your hardwood floor look very dull a little discolored and has small scratches on wood or basse is peeling
oil because too much traffic in your home and you want to bring
back the color shining and it is very necessary screen pass buffing fine sandpaper or a very light sandng and then you miss vacuun cleaner on hardwood floor cleaner is still necessary to put the recoating of base oil or water base end wood flooring is
the color you wanted
oil because too much traffic in your home and you want to bring
back the color shining and it is very necessary screen pass buffing fine sandpaper or a very light sandng and then you miss vacuun cleaner on hardwood floor cleaner is still necessary to put the recoating of base oil or water base end wood flooring is
the color you wanted
Sanding refinishing hardwood floors
Staining hardwood floors
New hardwood floors installation
Installation glue down
Hardwood floors repair
Buffing recoating
Sanding finishing decks
Installation quarter round
Installation molding
Hardwood floors design borders
plywood installation on concrete
Ceramic tile
Baseboar installation
Installation thresholds
Staining hardwood floors
New hardwood floors installation
Installation glue down
Hardwood floors repair
Buffing recoating
Sanding finishing decks
Installation quarter round
Installation molding
Hardwood floors design borders
plywood installation on concrete
Ceramic tile
Baseboar installation
Installation thresholds
